After placing an electronic fence around your property, you must set the pet collar. The dog must receive a warning beep when he walks near the fence boundary and a shock if he attempts to cross the fence. The severity of the shock your dog receives is its correction level. If this is set too low, the dog will ignore the shock and keep going. If too high, it will be more painful than necessary. The weight and stubbornness of your pet will determine the correction level needed.
Correction levels are as follows:
1 flash-no correction, collar beeps only (use this for training)
2 flashes-low correction (for dogs less than 20 lbs)
3 flashes-medium correction (for dogs 20 to 50 lbs)
4 flashes-medium high correction (for dogs over 50 lbs)
5 flashes-high correction (for hard to train dogs)
Instructions
1. Determine the proper correction level for your dog using the chart in above.
2. Push the black button on the side of the collar. When you push it, the light on the front of the collar will flash once. Soon after that, it will flash again from one to five times. The second group of flashing lights tells you the number of the correction. This is the level the collar is currently set at.
3. Push the black button once and when it stops flashing, within five seconds push it again. The correction level will immediately jump up one level. Example: The collar is set at level 3 and you want to increase it to level 4. Push the black button. You'll see one flash, followed by three. Push black button again. You'll see one flash, followed by four. Keep pushing the black button, waiting no more than five seconds, to change the correction level until you reach the desired level.
Tips Warnings
You may wish to test the collar to be sure it is working. To do that, attach the test light that came with your PetSafe#174; system to the metal probes on the collar. As you near the boundary wire, you should hear a quiet beeping sound and the light will flash.
Related Posts:
Change The Code On A Phantom Garage Door Opener
Change the Code on a Phantom Garage Door OpenerThe Phantom garage door opener by Overhead Door, uses a push button to quickly program remotes and keypads. When you lose a remote control, or feel t...
Use A Tortilla Warmer
Use a tortilla warmer to keep tortillas warm.As its name implies, a tortilla warmer is used to keep tortillas warm. Warm tortillas are softer and more malleable than cold tortillas, so you can wra...
What Is A Magnaflux Test
When metal parts are manufactured, especially those parts that involve the transportation industry, they must withstand a through testing of integrity. These types of tests must not destroy the pa...
Troubleshooting Kenmore Microwave Ovens
Troubleshooting Kenmore Microwave OvensSome of the problems you could have with your Kenmore microwave oven include the display not working correctly, the appliance not functioning correctly and e...
Program A Remote For A Genie 1/2 Hp Garage Door Opener
The Genie 1/2 HP garage door opener is a heavy duty opener. When replacing the remote controls, the new remotes require programming. Programming the remote for a Genie 1/2 HP garage door opener is...
