Bissell's Turbobrush eliminates manual scrubbing.
Use Bissell's Little Green PROheat for cleaning spots on your carpets, car seats, stairs and upholstery. Its TurboBrush tool contains a self-powered brush that attacks surface spills as well as embedded dirt by brushing the cleaning solution into the area and suctioning the dirty water. Designed with a built-in heater to keep the cleaning solution hot, the unit has separate tanks for clean and dirty water. This little machine has clips for the hose, electrical cord and all the attachments for compact storage.
Instructions
1. Fill the clean/solution tank by lifting the tank up and then away from the machine. Turn the tank upside down and unscrew the black cap. Remove the bottle insert. Fill the tank with cleaning formula up to the Formula Fill line. Add hot water up to the Water Fill line. Replace the bottle insert, screw the cap, and reattach the tank to the machine.
2. Twist the vacuum flex hose bracket latch clockwise to release the hose. Unwrap the entire hose.
3. Attach the TurboBrush tool to the spray trigger so the button lock clicks into the hole. Push the Brush/Suction switch to the Brush position.
4. Unwrap the entire power cord by first twisting the quick release wrap clockwise and plug it into a grounded outlet. Turn the machine on by pushing the power switch to the On position. Turn the heater on by pushing the heater switch to the On position. Wait for the heat indicator light to turn on.
5. Press the spray trigger for five to 10 seconds so the water can travel through the heater.
6. Shoot cleaning solution to the area you want to clean by holding the brush one inch above the spot and pressing the spray trigger.
7. Brush the cleaning solution into the soiled area. You may continue spraying solution while you're brushing.
8. Press the Brush/Suction switch to the Suction position. Remove the dirt and cleaning solution by pressing the brush down on the soiled surface and pulling it toward you.
9. Dry the area by continuing the suctioning strokes without pressing the spray trigger.
10. Clean the hose by vacuuming up clean water and lifting the brush up to drain the water into the Dirty/Collection tank.
11. Lift the tank release latch and remove the Dirty/Collection tank. Drain, rinse and replace the tank after every use and when the dirty water approaches the maximum fill line.
12. Remove the TurboBrush tool from the spray trigger and rinse under running water. Make sure the switch is in the Suction position when rinsing.
Tips Warnings
Use hot, not boiling water
Vacuum the area first
Related Posts:
Instructions For A Rainbow Carpet Shampooer
If your carpets get dirty, shampoo them with the Rainbow Aquamate.Rainbow makes a carpet-cleaning attachment for its vacuum called the Aquamate. The Aquamate is lightweight and quick to assemble c...
Hotpoint Self Cleaning Oven Instructions
To minimize the effort required to clean an oven, some Hotpoint ranges come with a self-cleaning feature. The self-cleaning option on an oven turns stubborn stains and spills into ash that is easy...
Braun Espresso Machine Instructions
Braun's home espresso machine creates espresso in minutes.A perfectly brewed cup of espresso is an achievement most people will probably never accomplish. Spot-on espresso involves grinding coffee...
Use Instructions For A Ge 42cup Coffee Urn
The General Electric 42-cup coffee urn allows you to make enough coffee for a crowd of people. The urn takes approximately 1 minute for every cup of coffee, so you should start the coffee approxim...
Instructions For Waring Ice Cream Makers
The Waring Ice Cream Parlor is a vintage ice cream machine first distributed in the 1970s. Using the Waring Ice Cream Parlor, you can make desserts such as ice cream and sorbets. Desserts are read...
