Friday, February 28, 2014

wood-liier-vs-spackle

wood liier vs spackle


Hello - sorry about the title which should read wood filler vs spackle I am going to repair rotted areas which I will thoroghly clean out first. I let dry well. Question is, would I be better with an exterior wood filler like Elmers, an exterior spackle or Bondo? I don't think I want to go as far a epoxy although I read it is strong. Too much drying time and prep work. I'm old and not well so a 'quicker' but good fix is what I'd like. I think it is safe to say I'd be better off with wood filler than with spackle if I am going to go in 1/2 at a few spots and want adhesion and durability. I have used Bondo in the past with good results but the mixing is pesty. If there is a good new exterior wood filler that you can put on with a knife like peanut butter, then sand, prime and paint I would like the name, please. I read about Elmers but have not used it. Thank you I think one important fact has been omitted. What KIND of rotted areas? Trim? Window sills? Door frames? I would use different methods and materials for different things. Anything structural would be replaced of course. Has the reason WHY these items rotted been addressed? As Vic noted - what exactly are you wanting to repair? Exterior spackling is only for dressing up minor defects in the substrate, it should not be used for any repairs. I rarely make repairs since replacement is the preferred way to go although I have used Durham's rock hard putty on occasion. It is a bear to sand so it pays to apply it neatly! For any repair to last you must get back to solid wood [remove all the rot] The areas to be fixed are only cosmetic like where two pieces of trim butt and are cracked. Also, some rotted wood along a piece of siding here and there. I have long since sold my table saw etc and am not too used to patch work. I watched some videos and they seem to say that these non structural smaller type repairs can be fixed with a thorough cleaning and wood filler. it looks like Elmers in a quart size. Goes on like peanut butter and seems to fill fairly deep holes. Bear in mind, please, I agree replacement is the way to go but I am old and not well like years ago so I am trying to keep the blemishes looking ok -just staying out of the woods. I wish I could do what I used to, believe me. Question is, if you do use filler, will a product like brand x, exterior wood filler be acceptable and do you have a recommendation as to the name of such a filler? Thank you If replacement is all you suggest that is ok I don't have enough knowledge about the various wood 'fillers' meant for repairing damaged wood to recommend any of them. I've only repaired minor rot more as a favor to the customer than as a good fix. If they wanted it fixed right, I'd point them toward a decent carpenter Where ever you have 2 pieces of wood joined together - that crack is best filled with caulking. Some of the carpenters here have used a bit of the different products available for repairing rotted wood - hopefully one of them will post a reply I wish I could do what I used to, believe me Me too actually I can still do what I used to - it just takes me a whole heap longer Yes it would be nice if some guys who used fillers would post here. We'll see. I know what you man about expansion and believe me if I were getting paid, I would replace wood so there would be no call back. I like your comment about 'it just takes longer'. What I have used in the past is Minwax wood hardner followed by a waterproof type Bondo, (all body filler is not waterproof). Minwax also sells a filler but it goes on like body filler and smells like it but I can't say for sure if it's the same. Originally Posted by mgmine What I have used in the past is Minwax wood hardner followed by a waterproof type Bondo, (all body filler is not waterproof). Minwax also sells a filler but it goes on like body filler and smells like it but I can't say for sure if it's the same. I'll be going out to a Home Depot and will check out the products you mention. I would never have thought of Minwax so I'll keep an eye out for it. Thank you








Related Posts:




  • Sealing gaps in hardwood floors caulk or wood filler

    sealing gaps in hardwood floors - caulk or wood filler?Looking to seal a variety of small gaps in our hardwood floors to close air gaps. Considering colored caulking or wood filler. I could proba...


  • Use concrete to set wood post

    Use concrete to set wood post?hi folks – Hope this is correct forum. I want to replace the roadside mailbox at my house. I want to use either a cedar wood post or a pressure treated wood post. Are...


  • Spraying stain on wood fence

    Spraying Stain on Wood FenceWe had a pressure treated wood fence installed last fall. We are ready to stain it (the wood has dried out as recommended by the fence installer). We used a Cabot deck...


  • Which is better and whycomposite fences vs solid wood fences

    Which is better and why...Composite Fences vs Solid Wood FencesI would like to to get a 105 ft 5 ft high solid board fence installed in my back yard with 2 four ft gates. One company is offering W...


  • Wood fillerputty before or after staining

    wood filler/putty before or after staining?My husband and I have no woodworking experience. We are in the process of removing a blotchy stain job on alder wood indoor railings. We sanded the old s...